HOSPITAL ELEVATORS are nothing but same as passenger elevator only difference is the size in which Bed and Stretcher can be accommodate. Hospital elevators are bit slow so the patients get more comfortable.
Digital Car Position Indicator shows car position on all the floors of building.
UP/DN Indicator shown the direction in which elevator move
Voltage Protection – Upper and lower limit can be defined in every phase (220V) instead of consolidated 3 phase (440 V). this means maximum safety.
Over & Under Load protection can be defined by ampere setting in individual phases for dot accuracy.
Phase Preventer saves electrical parts when the single or two phase is out of supply.
Phase Sequence Corrector automatically corrects the phase polarity when phases in the supply get changes.
ARD (Auto rescue device) lands the elevator to the nearby floor in case of power failure.
Fireman’s switch is an electrical switch which cancels all the command and let the lift comes on the defined fire floor which is easy for evacuation.
Over Speed Protection can be accomplished by the Over Speed Governor which is a mechanical system which comes in action in case of rise in the travelling speed of the cabin due to any following reasons: –
In case of brake failure.
In case of motor failure.
In case of gear box failure.
And even in case of wire rope breaks.
In any of the above mention accident, lift will never free fell, because mechanical break holds the Guide T and it will be stopped or slowly slide so that passenger or material will be safe in any circumstances.
Emergency Alarm can be raised in emergency or power failure condition.
VVVF (variable voltage variable frequency) drive control the motor by frequency regulation. Drive provides various safety and features to the system.
Light in the cabin automatically on and off, when the lift starts and stop, also can be controlled manually. Light even work in case of power failure because of back system. So it also works as emergency light
Light Curtain open the doors automatically when any passenger comes between them.
Floor Announcement announces floor position, gate status, and greet with customised message.
Music on travel gives a pleasant atmosphere during the ride.
Push to Talk help passenger to transmit the message in emergency for assistance.
Attendant Service / Non Attendant Service.
MFFS Stands for magnet floor and final (upper & lower limit) sensing. Replacement of limit switch (old and traditional technology). Though it senses without physical contact, life of the sensor is much more than the limit switch. Also accuracy of the same is unmatched.
Buffer is provided in the pit to cure the cabin / passenger / material inside the cabin from the damage. It gives spring action to the free fall cabin. Selection of the buffer depends upon the cabin size, capacity, speed, travelling height of the elevator.
Real Time Clock display time, day, date, month & year while travelling.
Designer cabin interior – Wide range of Ceiling, Wall designs, Flooring, Hand Rail, Door Design Cabin Selection.
Intercom can be used to interact with other people with the help of EPABX (must be pre-installed in the same premises / building) those who are in the same building.
L.C.D. Display provide cosmetic beauty to the elevator. Which displays door status, time, day, date, month & year.
Touch panel is the advance version of L.C.D. PANEL by which you can command elevator by the touch.
Air condition for soothing cabin atmosphere.
CCTV can be used to keep your elevator in complete video surveillance.
Biometric Access features allows who and when to travel.
Load Cell displays the load present in the cabin, which restrict overload.